Regency 4720 Bedienungsanleitung Seite 27

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 35
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 26
Section 5. System Messages
User's Manual Page 25
Error Messages
If operation or programming errors occur, the LCD will display the
following messages to explain the problem:
RESTRICTED
CODE
The touchpad or feature you are trying to use is not
available with this code.
RESTRICTED
DOOR
The code entered cannot be used to open the door.
RESTRICTED
TIME
The code entered cannot be used at this time of day.
RESTRICTED
ZONE
Zone cannot be bypassed (fire or other 24-hour zones
cannot be bypassed).
TRY AGAIN An invalid code or command was used. Restart from the
beginning.
LCD Displays
The English language LCD will normally display the day and time, plus
status and instructions for many status lights and touchpad functions. The
LCD will also display the following messages (in addition to trouble and
error messages):
# SEC TO ALARM This message provides a visual countdown of seconds
before an alarm is sounded and sent to the control
monitoring station. (After opening and entering a delayed
door, a warning will sound.)
## SEC TO EXIT (Displays after arming.) Your security system can be
programmed for a timed exit delay. The beeper will sound
(warning sound is optional) until the delay time is up and
the LCD will display the countdown to exit time.
ARMED The system is armed.
AUXILIARY
ALARM
Special sensors installed to protect furnaces, freezers, and so
on have triggered an alarm.
BYPASSED
(System disarmed)
One or more of the zones have been bypassed, or turned off.
This message will not be displayed if the system is armed.
FIRE ALARM Flashes - One or more zones programmed for fire
monitoring are in alarm.
INTRUSION Flashes - One or more zones programmed for intrusion
Technical Manuals Online! - http://www.tech-man.com
Seitenansicht 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare